CNC Instruction Procedure
Starting and Resurfacing
The CNC table should be resurfaced at the beginning of each shift.
| 1. To start the machine simply turn the switch to the on position |  |
| 2. Click the " |
 |
| 3. Click the " |
 |
| 4. Click the " |
 |
| 5. Click the "Parent |
 |
| 6. Open the "Weeke (D:)" drive |  |
| 7. Open the " |
 |
| 8. Open the " |
 |
| 9. Open the " |
 |
| 10. Click the "_____spoil. |
 |
| 11. When the file loads click the " |
 |
| 12. Click the " |
 |
| 13. Click both the Push off icons and the Front fence icon to turn them off |  |
| 14. Step on the foot pedal located under the CNC table |  |
|
15. Click the left Resurfacing icon and the right icon will turn yellow This icon is only clicked when resurfacing the table. Do not click icon for any other reason! |
 |
| 16. Press the "Cycle |
 |